2 Torque: max torque 25 N. Support standard 6-hole type disc brake. Front or Rear Integral Wheel. Hub Width: 100mm front or 135mm rear hub motor with 7-speed freewheel.
Power: 36V 750W / 48V 1000W. Input Voltage: DC 24V/36V48V (Universal). Single trip time(TM)+total trip time(TTM) Real time km/h or MPH display. Single Max speed(MXS)+single Average Speed(AVS). Single trip distance(DST)+Total Trip distance(ODO).6km/h push funtion, Cruise function. Head ligth, back lights, switching opitonal, brake status showing. Torque sensor imulation speed sensor 0-5 level+ battery capcity showing. 6.24V, 36V, 48V compatiable. Controller can be reprogrammed by Parameter setting. Data clear+parameter copy+Fault code Disply. Motor working power(W) showing. And motor working Temperature showing. LCD Alarm for motor over heat. Parts include: LCD8H, Key Button, Bracket.
Data display: It shows the riding speed, a single mileage and cumulative mileage, riding time, power-assist gear, motor power and temperature, battery voltage and charge status, brake status and the used ambient temperature and other cycling parameters. Intelligent power: A true reflection of the battery charge, real-time recording of the power consumption to ensure riding mileage.Stalls setting: Multi-gear switch and automatic save of the power-assist gear, and it can restore power-off stall state when turned on. Parameter setting: With a number of user parameter setting functions, motor parameters, velocity measurement parameters, speed-limit parameters, power parameters, power-assist control parameters, the minimum controller voltage and maximum current parameters and other operating models for settings adjustment. Data view: Users can view historical driving data and clear accordingly, view single or cumulative riding time, riding mileage, maximum speed and average speed of single riding. Vehicle boosting: With 6Km/h power-assisting functions, the boost logo flashes during boosting, and riders can use it when driving the vehicle and the vehicle driving is labor-saving and easy.
Pedal frequence: In pedal assistance mode, the display will show the pedals Revolutions Per Minute (RPM). Cruise and constant speed: With the setting and display of the cruise, achieving to automatically maintain the vehicle speed, so that the vehicle drives at a constant speed. Night mode: With the functions of LCD backlight display and headlight switch control, instrument backlight and headlights can be turned on during driving at night. Password setting: With three-bit of power-on password setting.
Automatically prompt: For the appeared failure of the vehicle, it can prompt different fault codes for easy inspection and maintenance of vehicle. With a temperature display for motor operation and it is to achieve the ultra-temperature alarm and motor protection. Use five-line of digital communication, the instrument has good compatibility and interchangeability, different instruments can be conducted the data exchanges and parameters copy directly.
Host part and operation buttons of the mer use sub-structure design, making the operation to be more reasonable and convenient. Power supply voltage of 24V, 36V, 48V can be automatically identified and compatible. Ebike 12-90V Universal Voltage Half-bar Twist Throttle with Lock. Half-Bar, against run away by careless. Compatible with 24V-90V ebike, Scooter With Hall Sensor Controller.
It comes with 5 Wires: Electric Lock In One 2-Wire(Red/Yellow) White Plug, Speed Control In One 3-Wire(Red/Black/White) SM Black Plug. Electric Lock Wires: Red To Input Yellow To Output. Speed Control Wires: Red To Positive, Black To Negative, White To The Speed Signal. 1 Unscrew the existing rear wheel screws, remove your rear wheel; 2 Install the motorized wheel and fasten screws; 3 Attach LCD, Brake lever and throttle; 4 Put Controller at suitable position and connect all wires. 5 Turn on battery, throttle key and LCD, set correct value from LCD Correct wheel size setting: according to your wheel size Correct max speed setting: set it at max value 99 Correct P1-P5 setting: P1=46, P2=0, P3=0, P4=0, P5=12 Save all value and restart LCD display.How to disable cruise function: To set C7=0 save and restart will disable cruise function again. The item "EBike Bicycle 36V/48V 1000W Front or Rear Integral Wheel Conversion Kits 20'" is in sale since Wednesday, July 14, 2021.
This item is in the category "Sporting Goods\Cycling\Bicycle Components & Parts\Electric Bicycle Components". The seller is "hallomotor_flagshipstore" and is located in Shanghai. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Mexico, Canada, Australia.